306 Using the Operator Panel Menus and Keypad
Tray 2
NOTE:
• Tray 2 is available only when the optional 250 sheet feeder is installed.
Purpose:
To specify the paper loaded in the optional 250 sheet feeder.
*1
The default for Paper Size varies depending on region-specific factory default.
NOTE:
• For more information on supported paper sizes, see also "Usable Print Media" on page 125.
Paper Size
mm series
A4 (210 x 297 mm)
*1
A5 (148 x 210 mm)
B5 (182 x 257 mm)
Letter (8.5 x 11")
Folio (8.5 x 13")
Legal (8.5 x 14")
Executive (7.25 x 10.5")
New Custom Size Portrait(Y) 297 mm* Specifies the length of the
custom size paper.
210-355 mm
Landscape(X) 210 mm Specifies the width of the
custom size paper.
140-215 mm
inch series Letter (8.5 x 11")
Folio (8.5 x 13")
Legal (8.5 x 14")
A4 (210 x 297 mm)
*1
A5 (148 x 210 mm)
B5 (182 x 257 mm)
Executive (7.25 x 10.5")
New Custom Size Portrait(Y) 11.7 inches* Specifies the length of the
custom size paper.
8.3-14.0 inches
Landscape(X) 8.3 inches* Specifies the width of the
custom size paper.
5.5-8.5 inches
Paper Type Plain*
Plain Thick
Lightweight Cardstock
Heavyweight Cardstock
Labels
Letterhead
Hole Punched
Colored
Other Type
Display Screen Off Does not display a popup menu that prompts to
set Paper Type and Paper Size when paper is
loaded in the optional 250 sheet feeder.
On* Displays a popup menu that prompts to set
Paper Type and Paper Size when paper is
loaded in the optional 250 sheet feeder.
To Next Page
Loading...
