Maintenance 409
3 Gently pull open the bypass tray cover.
4 Grasp both sides of the bypass tray, and then pull the bypass tray from the printer.
5 Pull the standard 250 sheet tray out of the printer about 200 mm. Hold the standard 250 sheet tray with both
hands, and remove it from the printer.
6 Remove the two screws joining the printer and the optional 250 sheet feeder by unscrewing them with a coin or
similar object.
NOTE:
• The screw hole is located in 70 mm recess from the front of the printer.
To Next Page
Loading...
