54 Basic Operation
8 Hold the standard 250 sheet tray with both hands, and remove it from the printer.
9 Lift the printer and align the five guide pins of the optional 250 sheet feeder with the holes at the bottom of the
printer. Gently lower the printer onto the optional 250 sheet feeder.
IMPORTANT:
• When lifting the machine, make sure to follow the precautions stated in "Machine Installation" on page 18.
• Be careful not to pinch your fingers when lowering the printer onto the optional 250 sheet feeder.
10 Secure the optional 250 sheet feeder to the printer by tightening the two screws provided with the feeder with a
coin or similar object.
NOTE:
• The screw hole is located in 70 mm recess from the front of the printer.
To Next Page
Loading...
