Printer Connection and Software Installation 91
Windows Server 2008 and Windows Server 2008 64-bit Edition
NOTE:
• You must log in as an administrator.
1 Click Start → Control Panel → Hardware and Sound → Printers.
2 Click Add a printer.
3 Click Add a network, wireless or Bluetooth printer.
4 Select printer or click The printer that I want isn't listed.
When you select your printer, go to step 7.
When you click The printer that I want isn't listed, go to step 5.
5 Select Add a printer using a TCP/IP address or host name, and then click Next.
6 Select TCP/IP Device from Device type, and enter the IP address for Hostname or IP address, and then click
Next.
If the User Account Control dialog box appears, click Continue.
NOTE:
• If you are an administrator on the computer, click Continue; otherwise, contact your administrator to continue the desired
action.
7 Click Have Disk to display the Install From Disk dialog box.
8 Click Browse, and then select the extracted setup information (.inf) file in "For Installing XML Paper
Specification (XPS) Print Driver" on page 86.
9 Click Open.
10 Click OK.
11 Select your printer name and click Next.
12 To change the printer name, enter the printer name in the Printer name box.
To use this printer as the default printer, select the Set as the default printer check box.
13 Click Next.
Installation starts.
14 If you do not share your printer, select Do not share this printer. If you share your printer, select Share this
printer so that others on your network can find and use it.
15 Click Next.
16 As the driver installation is completed, click Print a test page to print a test page.
17 Click Finish.
To Next Page
Loading...
Need help?
General
