Garmin CIRRUS PERSPECTIVE TOUCH+ - Page 112

Cockpit Reference Guide for the Cirrus SR2x with Perspective Touch+ by Garmin
190-02954-01 Rev. A
86
Flight Management
Flight
InstrumentsEIS
Nav/Com/
XPDR/Audio
Flight
Management
Hazard
AvoidanceAFCS
Additional
FeaturesAnnun/AlertsAppendixIndex
Flight
InstrumentsEAS
Audio and
CNS
Flight
Management
Hazard
AvoidanceAFCS
Additional
Features
Abnormal
OperationAnnun/AlertsAppendixIndex
d) Touch the Flight Plan Options Button to display the 'Flight Plan Options' Window.
e) Touch the Load Arrival Button to display the 'Arrival Selection' Screen.
2) To access the 'Select Arrival' Screen for the arrival airport:
If the desired arrival airport is already selected, touch the Arrival Button. The 'Select
Arrival' Screen is displayed.
Or:
a) Touch the Airport Button.
b) Use the keypad and the Enter Button to select the arrival airport. The 'Select Arrival'
Screen is displayed.
3) Scroll the list if needed and touch an Arrival Selection Button to select the arrival. The
'Select Transition' Screen may open.
4) Scroll the list if needed and available. Touch a Transition Selection Button to select the
transition. The 'Select Runway' Screen will open.
5) Scroll the list if needed and touch a Runway Selection Button to select the runway and
return to the 'Arrival Selection' Screen.
6) Touch the Preview Button, then the Show on Map Button to show the preview of the
arrival on the active display pane or touch the Show Chart Button to show the arrival
chart instead.
7) Touch the Load Button to insert the arrival into the flight plan.
Removing an arrival from a flight plan using the Touchscreen Controller:
1) For the active flight plan:
a) From MFW Home, touch PROC.
b) Touch the Arrival Button to display the 'Arrival Selection' Screen.
c) Touch the Remove Button. A 'Remove Arrival – <arrival identifier> from flight plan?'
Window is displayed.
Or:
a) From MFW Home, touch Flight Plan.
b) Touch the Arrival Header Button to display the 'Arrival Options' Window.
c) Touch the Remove Arrival Button. A 'Remove Arrival – <arrival identifier> from
flight plan?' Window is displayed.
Or:
For the standby flight plan:
a) From MFW Home, touch Flight Plan > Standby Flight Plan > PROC.
b) Touch the Arrival Button to display the 'Arrival Selection' Screen.
c) Touch the Remove Button. A 'Remove Arrival – <arrival identifier> from flight plan?'
Window is displayed.
Or: