Garmin CIRRUS PERSPECTIVE TOUCH+ - Page 113

Cockpit Reference Guide for the Cirrus SR2x with Perspective Touch+ by Garmin
190-02954-01 Rev. A 87
Flight Management
Flight
Instruments EIS
Nav/Com/
XPDR/Audio
Flight
Management
Hazard
Avoidance AFCS
Additional
Features Annun/Alerts Appendix Index
Flight
Instruments EAS
Audio and
CNS
Flight
Management
Hazard
Avoidance AFCS
Additional
Features
Abnormal
Operation Annun/Alerts Appendix Index
a) From MFW Home, touch Flight Plan > Standby Flight Plan.
b) Touch the Arrival Header Button to display the 'Arrival Options' Window.
c) Touch the Remove Arrival Button. A 'Remove Arrival – <arrival identifier> from
flight plan?' Window is displayed.
Or:
For the stored flight plan:
a) From MFW Home, touch Flight Plan > Flight Plan Options > Flight Plan Catalog
to display the 'Flight Plan Catalog' Screen.
b) Scroll the list if needed and touch a Stored Flight Plan Button to display the 'Catalog
Options' Window.
c) Touch the Edit Button to display the 'Edit Stored Flight Plan' Screen.
d) Touch the Flight Plan Options Button to display the 'Flight Plan Options' Window.
e) Touch the Load Arrival Button to display the 'Arrival Selection' Screen.
f) Touch the Remove Button. A 'Remove Arrival – <arrival identifier> from flight plan?'
Window is displayed.
2) Touch the OK Button. The arrival is removed from the flight plan.
WARNING: Never touch the Edit Runway Button while holding at a waypoint within
a departure or arrival procedure. Doing so will remove the holding pattern from the
flight plan, and the aircraft will fly its current heading without flying the remainder
of the flight plan.
Changing the arrival runway for a published arrival procedure:
1) For the active flight plan:
From MFW Home, touch Flight Plan.
Or:
For the standby flight plan:
From MFW Home, touch Flight Plan > Standby Flight Plan.
Or:
For the stored flight plan:
a) From MFW Home, touch Flight Plan > Flight Plan Options > Flight Plan Catalog
to display the 'Flight Plan Catalog' Screen.
b) Scroll the list if needed and touch a Stored Flight Plan Button to display the 'Catalog
Options' Window.
c) Touch the Edit Button to display the 'Edit Stored Flight Plan' Screen.
2) Display the 'Select Runway' Screen:
Touch the Arrival Runway Button.
Or: