Garmin CIRRUS PERSPECTIVE TOUCH+ - Page 118

Cockpit Reference Guide for the Cirrus SR2x with Perspective Touch+ by Garmin
190-02954-01 Rev. A
92
Flight Management
Flight
InstrumentsEIS
Nav/Com/
XPDR/Audio
Flight
Management
Hazard
AvoidanceAFCS
Additional
FeaturesAnnun/AlertsAppendixIndex
Flight
InstrumentsEAS
Audio and
CNS
Flight
Management
Hazard
AvoidanceAFCS
Additional
Features
Abnormal
OperationAnnun/AlertsAppendixIndex
2) Touch the Approach Button to display the ‘Approach Selection’ Screen.
3) To select the approach:
a) If the desired approach airport is already selected, touch the Approach Button. The
'Select Approach' Screen is displayed.
b) Scroll the list, if needed, and touch the desired Approach Selection Button.
c) The 'Select Transition' Screen is automatically displayed after selecting an approach
from the 'Select Approach' Screen. Touch the desired Transition Selection Button to
select the transition.
Or:
a) Touch the Airport Button.
b) Use the keypad and the Enter Button to select the approach airport. The 'Select
Approach' Screen is displayed.
c) Scroll the list, if needed, and touch the desired Approach Selection Button.
d) The 'Select Transition' Screen is automatically displayed after selecting an approach
from the 'Select Approach' Screen. Touch the desired Transition Selection Button to
select the transition.
e) If a visual approach was selected, to change the Final Approach Distance, touch the
Final Approach Distance Button, then touch the numeric button for the desired
distance.
Or:
a) If the SBAS Button is available, touch the SBAS Button to display the keypad and
use it to select the SBAS channel number (The SBAS channel Button is only available
when an RNAV, GPS, or no approach is selected).
If the SBAS Button is not available, touch the Approach Button to display the ‘Select
Approach’ Screen. Scroll as needed and touch the Select by SBAS Channel Button
to display the keypad, and use it to select the SBAS channel number.
b) Touch the Enter Button to accept the SBAS channel and return to the ‘Approach
Selection’ Screen with the airport and approach selected.
c) Touch the Transition Button to display the 'Select Transition' Screen.
4) Scroll the list, if needed, and touch a Transition Selection Button to select the transition.
5) To set the minimums, touch the Minimums Button to display the ‘Minimums’ Screen.
a) If Baro is desired, touch the Minimums Button to display the ‘Minimums Source’
Window.
b) Touch the Baro Button to select barometric minimums and return to the ‘Minimums’
Screen.
c) Use the keypad to select the minimums altitude.