Cockpit Reference Guide for the Cirrus SR2x with Perspective Touch+ by Garmin
190-02954-01 Rev. A 93
Flight Management
Flight
Instruments EIS
Nav/Com/
XPDR/Audio
Flight
Management
Hazard
Avoidance AFCS
Additional
Features Annun/Alerts Appendix Index
Flight
Instruments EAS
Audio and
CNS
Flight
Management
Hazard
Avoidance AFCS
Additional
Features
Abnormal
Operation Annun/Alerts Appendix Index
d) Touch the Enter Button to accept the barometric minimum altitude and return to the
‘Approach Selection’ Screen.
Or:
a) If temperature compensated minimum is desired, touch the Minimums Button to
display the ‘Minimums Source’ Window.
b) Touch the Temp Comp Button. The first time temperature compensation is enabled,
the ‘Destination Temp’ Screen is displayed. Use the keypad and the Enter Button to
select the temperature at the airport. If temperature compensation was previously
enabled, the previous entry for destination temperature is automatically entered.
c) Use the keypad to select the minimums altitude.
d) Touch the Enter Button to accept the temperature compensated minimums and
return to the ‘Approach Selection’ Screen.
6) To set the landing runway, touch the Landing RWY Button to display the ‘Select Landing
Runway' Screen and touch the desired runway.
7) Touch the Preview Button, then the Show on Map Button to show the preview of
the approach on the active display pane or touch the Show Chart Button to show the
approach chart instead.
8) Select the Approach Mode:
If an RNAV approach was selected and User Approach Mode Selection is enabled, touch
the Approach Mode Button and change the mode to the desired settings.
9) Touch the Load Button to insert the approach into the flight plan.
If a visual approach was selected, an advisory message will appear stating that obstacle
clearance is not provided and the approach glidepath and threshold crossing height will
also be displayed. Touch the OK Button to continue.
Loading an approach procedure into a stored flight plan:
1) From MFW Home, touch Flight Plan > Flight Plan Options.
2) Touch the Flight Plan Catalog Button to display the ‘Flight Plan Catalog’ Screen.
3) Touch a Stored Flight Plan Button to display the ‘Catalog Options’ Screen.
4) Touch the Edit Button to display the ‘Edit Stored Flight Plan’ Screen.
5) Touch the Flight Plan Options Button to display the ‘Flight Plan Options’ Window.
6) Touch the Load Approach Button to display the ‘Approach Selection’ Screen.
7) Select the airport and approach:
a) If needed, touch the Airport Button to display the keypad and use it to select the
approach airport.
b) Touch the Enter Button to accept the approach airport.
To Next Page
Loading...
