Garmin CIRRUS PERSPECTIVE TOUCH+ - TOUCHSCREEN CONTROLLER FAILURE; TRANSPONDER FAILURE; FMS DEGRADATION; DEAD RECKONING NAVIGATION

Cockpit Reference Guide for the Cirrus SR2x with Perspective Touch+ by Garmin
190-02954-01 Rev. A
164
Additional Features
Flight
InstrumentsEIS
Nav/Com/
XPDR/Audio
Flight
Management
Hazard
AvoidanceAFCS
Additional
FeaturesAnnun/AlertsAppendixIndex
Flight
InstrumentsEAS
Audio and
CNS
Flight
Management
Hazard
AvoidanceAFCS
Additional
Features
Abnormal
OperationAnnun/AlertsAppendixIndex
The International dialing sequence is necessary to place a call from the cockpit to an
external phone: Country Code + City/Area Code (if any) + Telephone Number. The
following country codes may be used when calling other satellite telephone systems.
Satellite System Country Code
Inmarsat 870
ICO
8810 or 8811
Ellipso 8812 or 8813
Iridium 8816 or 8817
Globalstar 8818 or 8819
International Calling Codes
5) Touch the Send Button. The system now begins establishing a connection. The system
indicates a completed connection when the telephone is answered.
Making an external call by selecting a contact:
1) From MFW Home, touch Services > Contacts. Touch the Stored Tab (if not already
selected).
2) Touch the button corresponding to the desired contact. The selected contact is displayed.
3) Touch the Call or Send Text Button. A selection screen is displayed.
4) Touch the Make Satellite Phone Call Button.
Or:
Touch the Make Bluetooth Phone Call Button. The system initiates the call. The system
indicates a completed connection when the telephone is answered.
Making a call using a contact from a Bluetooth connected PED:
1) From MFW Home, touch Services > Contacts. Touch the Pilot Bluetooth Tab.
2) Touch the button corresponding to the desired contact. The selected contact is displayed.
Touch the Copy To Stored Contacts Button to save the contact in the Stored Tab on
the Touchscreen Controller.
3) Touch the Call or Send Text Button. A selection screen is displayed.
4) Touch the Make Bluetooth Phone Call Button. The system initiates the call using the
connected PED. The system indicates a completed connection when the telephone is
answered.
Entering numbers during an Iridium call:
1) From MFW Home, touch Services > Satellite Phone.
2) With a call already connected, touch the Cockpit Phone Button. The ‘Satellite Phone -
Cockpit’ Screen is displayed.