EasyManua.ls Logo

Garmin CIRRUS PERSPECTIVE TOUCH+ - Page 253

Garmin CIRRUS PERSPECTIVE TOUCH+
324 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Cockpit Reference Guide for the Cirrus SR2x with Perspective Touch+ by Garmin
190-02954-01 Rev. A 227
Annunciations & Alerts
Flight
Instruments EIS
Nav/Com/
XPDR/Audio
Flight
Management
Hazard
Avoidance AFCS
Additional
Features Annun/Alerts Appendix Index
Flight
Instruments EAS
Audio and
CNS
Flight
Management
Hazard
Avoidance AFCS
Additional
Features
Abnormal
Operation Annun/Alerts Appendix Index
System Message Comments
GIA #1 INOP: SERL
– Internal GIA Serial
Communication Fault.
GIA 1 serial communication fault. Check GIA serial communication.
GIA #1 INOP: VOLT
Check GIA Voltage.
GIA 1 low voltage. Check voltage.
GIA #1 OVER TEMP
Check GIA Temperature.
GIA 1 is reporting an over-temperature condition.
GIA #2 FAN FAIL
Fan fault, check GIA
temperature.
GIA #2 fan failure. Monitor GIA #2 temperature.
GIA #2 INOP - CRNT
Check GIA Current.
GIA 2 current is low. The current should be checked.
GIA #2 INOP: SERL
– Internal GIA Serial
Communication Fault.
GIA 2 serial communication fault. Check GIA serial communication.
GIA #2 INOP: VOLT
Check GIA Voltage.
GIA 2 low voltage. Check voltage.
GIA #2 OVER TEMP
Check GIA Temperature.
GIA 2 is reporting an over-temperature condition.
GLIDE/ASSIST RING
ASSIST – Unavailable
above [#}.
Glide assist / glide ring unavailable above specified altitude.
GLIDESLOPE #1 INOP:
INTRL – Glideslope Internal
Fault
The Glideslope sub-system of the GIA is inoperative due to an internal
fault.
GLIDESLOPE #2 INOP:
INTRL – Glideslope Internal
Fault
The Glideslope sub-system of the GIA is inoperative due to an internal
fault.
GMA 1 INOP: COMM
GMA Communication Fault.
There is a problem with the GMA 1 config module connection. Check the
connection.
GMA 1 INOP: INTRL
GMA Internal Fault.
GMA 1 has an internal fault. The system should be serviced.
GMA 1 INOP: SOFTWARE
– GMA CRC Fault.
The GMA is inoperative due to a CRC fault.
GMA 1 INOP: VOLTAGE
Voltage outside standard
range.
The GMA is inoperative due to a voltage fault.

Table of Contents

Related product manuals