Cockpit Reference Guide for the Cirrus SR2x with Perspective Touch+ by Garmin
190-02954-01 Rev. A
240
Annunciations & Alerts
Flight
InstrumentsEIS
Nav/Com/
XPDR/Audio
Flight
Management
Hazard
AvoidanceAFCS
Additional
FeaturesAnnun/AlertsAppendixIndex
Flight
InstrumentsEAS
Audio and
CNS
Flight
Management
Hazard
AvoidanceAFCS
Additional
Features
Abnormal
OperationAnnun/AlertsAppendixIndex
System Message Comments
SLCT MAG – Select
MAGNETIC NAV ANGLE
display units.
The system notifies the pilot to set the Nav Angle units on the ‘Avionics
Settings’ Screen to Magnetic.
SLCT NAV – Select NAV on
CDI for approach.
The system notifies the pilot to set the CDI to the correct NAV receiver. Set
the CDI to the correct NAV receiver.
SLCT NON-MAG – Select
alternate NAV ANGLE
display units.
The system notifies the pilot to set the Nav Angle units on the ‘Avionics
Settings’ Screen to True.
SMS TEXT MSG MEM
LIMIT – Oldest MSG will
be deleted when MSG
received.
The memory limit for SMS text messaging has been reached. The oldest
text message will automatically be deleted when a new SMS text message
is received.
STEEP TURN – Steep turn
ahead.
The computed bank angle needed to execute the turn ahead may exceed
the current bank angle limit.
STRMSCP FAIL –
Stormscope has failed.
Stormscope has failed. The system should be serviced.
SURFACEWATCH
DISABLED – Too far north/
south.
The SurfaceWatch system has been disabled.
SURFACEWATCH FAIL –
Invalid audio configuration.
The SurfaceWatch system has failed due to an invalid audio configuration.
SURFACEWATCH FAIL –
Invalid configurable alerts.
The SurfaceWatch system has failed due to invalid configurable alerts.
SURFACEWATCH FAIL –
One or more inputs invalid.
The SurfaceWatch system has failed due to one or more invalid inputs.
SURFACEWATCH
INHIBITED – SurfaceWatch
inhibited.
The SurfaceWatch system has been inhibited.
SVT DISABLED – Out of
available terrain region.
Synthetic Vision is disabled because the aircraft is not within the
boundaries of the installed terrain database.
SVT DISABLED – Terrain
DB resolution too low.
Synthetic Vision is disabled because a terrain database of sufficient
resolution (9 arc-second or better) is not currently installed.
SYSTEM INOP: AIRCRAFT
ID – Aircraft-specific config
lost / corrupted.
The system configuration has changed unexpectedly. The system should be
serviced.
SYSTEM INOP: FLEET ID
– System configuration lost
or corrupted.
The system configuration has changed unexpectedly. The system should be
serviced.
To Next Page
Loading...
