Cockpit Reference Guide for the Cirrus SR2x with Perspective Touch+ by Garmin
190-02954-01 Rev. A 59
Flight Management
Flight
Instruments EIS
Nav/Com/
XPDR/Audio
Flight
Management
Hazard
Avoidance AFCS
Additional
Features Annun/Alerts Appendix Index
Flight
Instruments EAS
Audio and
CNS
Flight
Management
Hazard
Avoidance AFCS
Additional
Features
Abnormal
Operation Annun/Alerts Appendix Index
Touch the Insert at End Button. The waypoint is inserted as the last waypoint in the
active flight plan.
Adding a waypoint into the active flight plan using the Nearest Button:
1) From MFW Home, touch Nearest.
2) Touch the Airport Button, INT Button, VOR Button, NDB Button, VRP Button, or User
Button.
3) Scroll as necessary and touch the desired waypoint button.
4) Touch the Insert in Flight Plan Button.
5) Scroll the list as necessary, and touch the Waypoint Selection Button to select where to
insert the new waypoint. The waypoint will be inserted into the active flight plan before
the selected waypoint.
Or:
Touch the Insert at End Button. The waypoint is inserted as the last waypoint in the
active flight plan.
Adding waypoints using the Map Pointer (Rerouting):
1) For the active flight plan: Go to Step 2.
Or:
For the standby flight plan: From MFW Home, touch Flight Plan > Standby Flight Plan
> Flight Plan Options > Preview FPL.
Or:
For the stored flight plan:
a) From MFW Home, touch Flight Plan > Flight Plan Options > Flight Plan Catalog
to display the 'Flight Plan Catalog' Screen.
b) Scroll the list if needed and touch a Stored Flight Plan Button to display the 'Catalog
Options' Window.
c) Touch the Edit Button.
d) Touch the Flight Plan Options Button.
e) Touch the Preview FPL Button to display the stored flight plan map.
2) Push the lower knob to the display 'Map Pointer Control' Screen on the Touchscreen
Controller, and to activate the Map Pointer.
3) Place the map pointer over a waypoint or map location for the next desired waypoint.
Or:
Place the map pointer over multiple map items.
Touch the Prev or Next Button to cycle to the desired waypoint.
Or: