Garmin CIRRUS PERSPECTIVE TOUCH+ - Page 86

Cockpit Reference Guide for the Cirrus SR2x with Perspective Touch+ by Garmin
190-02954-01 Rev. A
60
Flight Management
Flight
InstrumentsEIS
Nav/Com/
XPDR/Audio
Flight
Management
Hazard
AvoidanceAFCS
Additional
FeaturesAnnun/AlertsAppendixIndex
Flight
InstrumentsEAS
Audio and
CNS
Flight
Management
Hazard
AvoidanceAFCS
Additional
Features
Abnormal
OperationAnnun/AlertsAppendixIndex
a) Touch the Map Item Button to open the 'Map Item Selection' Screen..
b) Touch the desired waypoint.
4) Touch the Insert In FPL Button. The 'Insert Before Waypoint' Screen is displayed.
5) Scroll the list as necessary, and touch the Waypoint Selection Button to select where to
insert the new waypoint. The waypoint is inserted before the selected waypoint.
Or:
Touch the Insert at End Button. The waypoint is inserted as the last waypoint in the
active flight plan.
Or:
For airfield waypoints, touch the Set as Destination Button if desired. The waypoint is
inserted as the flight plan destination.
If a new User Waypoint is inserted, the system will create a User Waypoint using the LAT/
LON Mode. The default name of the new User Waypoint will be 'WPT' followed by the
numerals ‘000’. Future rerouting requiring the creation of new User Waypoints will have
similar default names with an incremental numeric value (example: 'WPT001', etc.).
6) Touch the Done Button to update the flight plan.
Or:
Add more waypoints to the planned rerouting:
a) Touch the Continue Reroute Button.
b) Use the Touchpad to move the pointer to a waypoint or the map location for the
next desired waypoint.
c) Touch the Reroute Insertion Button to insert into the planned rerouting.
d) Touch the Load Button to add the entire rerouting to the flight plan, or repeat Step
6b and 6c.
Removing an individual waypoint or multiple waypoints from a flight plan:
1) For the active flight plan: From MFW Home, touch Flight Plan.
Or:
For the standby flight plan: From MFW Home, touch Flight Plan > Standby Flight Plan.
Or:
For the stored flight plan:
a) From MFW Home, touch Flight Plan > Flight Plan Options > Flight Plan Catalog
to display the 'Flight Plan Catalog' Screen.
b) Scroll the list if needed and touch a Stored Flight Plan Button to display the 'Catalog
Options' Window.
c) Touch the Edit Button.
2) Scroll the list if necessary and touch a Waypoint Selection Button to display the 'Waypoint
Options' Window. Then, touch the Remove WPT(s) Button.