Garmin CIRRUS PERSPECTIVE TOUCH+ - Page 87

Cockpit Reference Guide for the Cirrus SR2x with Perspective Touch+ by Garmin
190-02954-01 Rev. A 61
Flight Management
Flight
Instruments EIS
Nav/Com/
XPDR/Audio
Flight
Management
Hazard
Avoidance AFCS
Additional
Features Annun/Alerts Appendix Index
Flight
Instruments EAS
Audio and
CNS
Flight
Management
Hazard
Avoidance AFCS
Additional
Features
Abnormal
Operation Annun/Alerts Appendix Index
3) To remove an individual waypoint, touch the OK Button in response to 'Remove
<waypoint name>?'. The waypoint is removed. To cancel the request, touch the Cancel
Button.
Or:
To remove a series of multiple waypoints:
a) Touch the Remove Multiple Button to display the 'Remove From <waypoint>
Through' Window.
b) Touch a Waypoint Button that is sequenced before or after the previously selected
waypoint. The confirmation window 'Remove <waypoint> Through <waypoint>?'.
c) Touch the OK Button to confirm the removal of the two selected waypoints and all
waypoints sequenced between them, the Edit Button to return to the previous step,
or the Cancel Button.
Enabling/disabling a fly over waypoint:
1) For the active flight plan: From MFW Home, touch Flight Plan.
Or:
For the standby flight plan: From MFW Home, touch Flight Plan > Standby Flight Plan.
Or:
For the stored flight plan:
a) From MFW Home, touch Flight Plan > Flight Plan Options > Flight Plan Catalog
to display the 'Flight Plan Catalog' Screen.
b) Scroll the list if needed and touch a Stored Flight Plan Button to display the 'Catalog
Options' Window.
c) Touch the Edit Button to display the 'Edit Stored Flight Plan' Screen.
2) Touch a Waypoint Selection Button to display the 'Waypoint Options' Window.
3) Touch the Fly Over Waypoint Button to enable/disable the waypoint as a fly-over
waypoint.
Adding a heading after a waypoint in the active flight plan:
1) From MFW Home, touch the Flight Plan Button.
2) Scroll the list as necessary, and touch the desired Waypoint Selection Button. The heading
will be inserted after this waypoint.
3) Touch the Insert Heading Leg Button to display the keypad.
4) Use the keypad to enter the heading and touch Enter. A 'manseq' heading Waypoint
Selection Button will be added to the active flight plan.
Editing a heading after a waypoint in the active flight plan:
1) From MFW Home, touch Flight Plan.
2) Scroll the list as necessary, and touch the desired 'manseq' heading Waypoint Selection
Button to display the 'Waypoint Options' Window.