Garmin CIRRUS PERSPECTIVE TOUCH+ - Page 99

Cockpit Reference Guide for the Cirrus SR2x with Perspective Touch+ by Garmin
190-02954-01 Rev. A 73
Flight Management
Flight
Instruments EIS
Nav/Com/
XPDR/Audio
Flight
Management
Hazard
Avoidance AFCS
Additional
Features Annun/Alerts Appendix Index
Flight
Instruments EAS
Audio and
CNS
Flight
Management
Hazard
Avoidance AFCS
Additional
Features
Abnormal
Operation Annun/Alerts Appendix Index
b) Touch the Hold at Waypoint Button. The 'Hold at Waypoint' Screen is displayed.
Or:
a) To edit, touch the Hold Waypoint Selection Button. The 'Waypoint Options' Window
is displayed.
b) Touch the Edit Hold Button. The 'Hold at Waypoint' Screen is displayed.
3) Touch the Turn Button, and touch the Right Button or the Left Button to select the turn
direction.
4) Touch the Course Direction (Inbound or Outbound) Button, and touch the Inbound
Button or the Outbound Button to select the course direction.
5) Touch the Course Button to display the keypad. Use the keypad and the Enter Button to
select the inbound or outbound course.
6) Touch the Leg Length Mode Button, and touch the Distance Button or the Time Button
to select the length mode.
7) Touch the Leg Time Button or the Leg Distance Button to display the keypad. Use the
keypad and the Enter Button to select the length of the leg.
8) Touch the Expect Further Clearance Button to display the keypad. Use the keypad and
the Enter Button to select the time for a reminder. A system message (HOLD EXPIRED
Holding EFC time expired.) will be triggered at the selected time.
9) Touch the Create Button to create and add the hold into the flight plan.
Or:
Touch the Save Button to save the changes and return to the flight plan.
Creating a user-defined hold at the aircraft present position:
1) From MFW Home, touch Flight Plan > Flight Plan Options.
2) Touch the Hold at P. POS Button. The 'Hold at Waypoint' Screen is displayed.
3) Touch the Turn Button, and touch the Right Button or the Left Button to select the turn
direction.
4) Touch the Course Direction (Inbound or Outbound) Button, and touch the Inbound
Button or the Outbound Button to select the course direction.
5) Touch the Course Button to display the keypad. Use the keypad and the Enter Button to
select the inbound or outbound course.
6) Touch the Leg Length Mode Button, and touch the Distance Button or the Time Button
to select the length mode.
7) Touch the Leg Time Button or the Leg Distance Button to display the keypad. Use the
keypad and the Enter Button to select the length of the leg.
8) Touch the Expect Further Clearance Button to display the keypad. Use the keypad and
the Enter Button to select the time for a reminder.
9) Touch the Create Button to create an Offroute Direct-to hold waypoint at the aircraft
present position.