Garmin CIRRUS PERSPECTIVE TOUCH+ - Page 100

Cockpit Reference Guide for the Cirrus SR2x with Perspective Touch+ by Garmin
190-02954-01 Rev. A
74
Flight Management
Flight
InstrumentsEIS
Nav/Com/
XPDR/Audio
Flight
Management
Hazard
AvoidanceAFCS
Additional
FeaturesAnnun/AlertsAppendixIndex
Flight
InstrumentsEAS
Audio and
CNS
Flight
Management
Hazard
AvoidanceAFCS
Additional
Features
Abnormal
OperationAnnun/AlertsAppendixIndex
10) If desired, to enter the hold into the flight plan, touch the PPOS-H Waypoint Selection
Button to display the 'Direct To' Screen.
11) Touch the Insert in Flight Plan Button. The 'Insert ¯ PPOS-H Before?' Window is
displayed.
12) Touch the desired Waypoint Selection Button, and the hold is inserted in the flight plan
before the selected waypoint.
Creating a user-defined hold at a direct-to waypoint:
1) From MFW Home, touch Flight Plan.
2) Touch the ¯ Button and set up the Direct To waypoint as desired.
3) Touch the Hold Button. The 'Direct To Hold' Screen is displayed.
4) Touch the Turn Button, and touch the Right Button or the Left Button to select the turn
direction.
5) Touch the Course Direction (Inbound or Outbound) Button, and touch the Inbound
Button or the Outbound Button to select the course direction.
6) Touch the Course Button to display the keypad. Use the keypad and the Enter Button to
select the inbound or outbound course.
7) Touch the Leg Length Mode Button, and touch the Distance Button or the Time Button
to select the length mode.
8) Touch the Leg Time Button or the Leg Distance Button to display the keypad. Use the
keypad and the Enter Button to select the length of the leg.
9) Touch the Expect Further Clearance Button to display the keypad. Use the keypad and
the Enter Button to select the time for a reminder.
10) Touch the Enter Button to return to the 'Direct To' Screen.
11) Touch the Activate ¯ Button to activate the Direct To and add the hold into the flight
plan.
Removing a user-defined hold at an active flight plan waypoint or at a direct-to way-
point (hold not active):
1) From MFW Home, touch Flight Plan.
2) Scroll the list, if necessary, and touch the Hold Waypoint Selection Button. The 'Waypoint
Options' Window is displayed.
3) Touch the Remove Hold Button.
4) To remove only the selected hold, touch the OK Button in response to 'Remove
<waypoint name>?'. The hold is removed. To cancel the request, touch the Cancel
Button.
Or:
To remove the hold along with a series of multiple waypoints: