Garmin CIRRUS PERSPECTIVE TOUCH+ - Page 101

Cockpit Reference Guide for the Cirrus SR2x with Perspective Touch+ by Garmin
190-02954-01 Rev. A 75
Flight Management
Flight
Instruments EIS
Nav/Com/
XPDR/Audio
Flight
Management
Hazard
Avoidance AFCS
Additional
Features Annun/Alerts Appendix Index
Flight
Instruments EAS
Audio and
CNS
Flight
Management
Hazard
Avoidance AFCS
Additional
Features
Abnormal
Operation Annun/Alerts Appendix Index
a) Touch the Remove Multiple Button to display the 'Remove From <hold waypoint>
Through' Window.
b) Touch a Waypoint Button that is sequenced before or after the previously
selected hold waypoint. The confirmation window 'Remove <waypoint> Through
<waypoint>?'is displayed.
c) Touch the OK Button to confirm the removal of the two selected waypoints and
all waypoints sequenced between them. To cancel the request, touch the Cancel
Button.
Exiting a user-defined hold at an active flight plan waypoint or direct-to waypoint
(hold active):
From PFW Home, touch the SUSP Button to return to automatic waypoint sequencing.
Or:
Press the SUSP Softkey to return to automatic waypoint sequencing.
Removing a user-defined hold at the aircraft present position:
1) From MFW Home, touch Flight Plan.
2) Scroll the list, if necessary, and touch the PPOS-H Waypoint Selection Button, or touch the
¯ Button. The 'Direct To' Window is displayed.
3) Touch the Remove PPOS-H Button.
4) Touch the OK Button in response to “Remove ¯ PPOS-H?”. The holding pattern is
removed. To cancel the request, touch the Cancel Button.
Inverting a Flight Plan
Inverting the active or standby flight plan:
1) For the active flight plan: From MFW Home, touch Flight Plan.
Or:
For the standby flight plan: From MFW Home, touch Flight Plan > Standby Flight Plan.
2) Touch the Flight Plan Options Button to display the 'Flight Plan Options' Window.
3) Touch the Invert Button.
4) Touch the OK Button in response to “Invert flight plan?”. The flight plan is inverted. To
cancel the request, touch the Cancel Button.
Inverting a stored flight plan:
1) From MFW Home, touch Flight Plan > Flight Plan Options.
2) Touch the Flight Plan Catalog Button to display the 'Flight Plan Catalog' Screen.
3) Scroll the list if necessary and touch a Stored Flight Plan Button to display the 'Catalog
Options' Window.
4) Touch the Edit Button to display the 'Edit Stored Flight Plan' Screen.