Brivo OEC 715/785/865 Mobile C-Arm X-Ray Product Service Manual
3-50
9. According CD/DVD check procedure check CD/DVD function (Refer to CD/DVD check of 3.6.1
Workstation Check) and reinstall workstation covers.
10. Reinstall the computer cover and Workstation covers.
3.7.2. Laser Aimer
Laser Aimer on Monoblock
1. Paste multi language label and laser warning
label.
2. Laser Aimer, which attaches to Monoblock, is incorporated with the collimator cover. Remove the
standard collimator top cover. Position the collimator cover with laser aimer and plug the power
cable with laser label on connector in Bundle cable. Tighten the secure screws of the collimator
cover. Remove the laser aimer cover. Power on the system.
3. Install the BAFT to Image Intensifier and adjust BAFT center to image center.
To Next Page
Loading...
