Brivo OEC 715/785/865 Mobile C-Arm X-Ray Product Service Manual
3-64
Ensure the localizer bolt of Removable Grid Holder in the slot of image intensifier.
4. Install Grid on removable grid hold and ensure the direction of grid as below picture.
5. The Removable Grid is ready for use.
3.7.10. Wireless DICOM
Wireless DICOM option kit includes 9 main parts:
1. WiFi adapter
2. Ethernet card
3. Power supply cable for WiFi adapter
4. WiFi adapter Power switch
5. Power switch cable
6. Ethernet cable
7. Treadle bars
8. Secure screws
9. Ethernet card pusher
Follow the steps below to install and configure Wi-Fi Internet Adapter kit.
1. Remove Workstation top/back/side/front covers.
2. Install WiFi adapter by 2 treadle bars in up/right picture with 4 screws and connect Ethernet cable as shown in
the below picture.
3. Open Workstation computer cover and install the Ethernet card, and card pusher.
To Next Page
Loading...
