GE Brivo OEC 715 - Printer

Installation
3-57
3.7.4. Printer
Brivo OEC 715/785/865 offers below printers as options:
• UP-990AD Thermal Printer
• UP-D897 Thermal Printer
• UP-971AD Thermal Printer
• UP-D898MD Thermal Printer
Brivo OEC 715/785/865 is also compatible with below
printers.
• UP-970AD Thermal Printer
• UP-991AD Thermal Printer
• UP-X898MD Thermal Printer
Please follow below steps to install the printers.
1.
Power off the system. Open the rear cover of the
workstation.
2. Plug one end of the USB cable to the video port of the
printer. Plug the power supply cable into the socket on
the printer. Put the cables through the hole of the
workstation. Put the printer in the cabinet.
3. Plug the USB cable into the USB port on computer.
4. Cut off the other end of the power supply cable. Strip off 3 wire ends.