Software
5-5
Insert USB disk with license file into USB port of Workstation, in “Medium” pull down manual select
corresponding subarea and license file, click <OK>.
If invalid eLicense Key added or eLicense File imported, it will prompt the information
dialog with message: It’s an invalid eLicense key/file. Input/import eLicense key/file is
needed.
Hardware Configure:
Monitor Type: Selects the monitor type (Mono Display / Color Display) from pull down manual for the
current product (No monitor type is set as default).
Filter Option: Disable/Enable removable filter option.
5.2.3. Calibration
Above is the calibration interface, detailed calibration instruction, please refer to Calibration chapter 4.
To Next Page
Loading...
