GE Brivo OEC 715 - System Descriptions; System Overview

Brivo OEC 715/785/865 Mobile C-Arm X-Ray Product Service Manual
2-2
WARNING
2.1. System Descriptions
System overview
Brivo OEC 715/785/865 Mobile C-Arm X-ray Product is intended to provide fluoroscopic and film imaging
of the patient in diagnostic and surgical applications. Clinical applications may include, but are not
limited to, orthopedic, Pain Management Procedures and General Surgery. Such users will use this
system on a daily basis.
Only properly trained persons can operate this equipment.
Brivo OEC 715/785/865 Mobile C-Arm X-ray Product includes:
Mobile C-Arm
‒ high frequency X-Ray generator
‒ Image intensifier
‒ GigE CCD camera and console
‒ Collimator
Mobile Workstation
‒ Dual LCD monitors
‒ Computer
‒ Power distribution unit
‒ External storage media (USB), etc
Options
‒ DVD R/W Rom (External storage media)
‒ Thermal Printer, DICOM Printer
‒ Laser aimer on the image intensifier
‒ Laser aimer on the tube
‒ 30cm skin spacer
‒ Film cassette holder
‒ Video Distributor for External DVI video output
‒ Removable Filter
‒ Removable Grid
‒ Dual 19” Mono LCD Monitor (only for Brivo OEC 785)
‒ Wireless Network Interface (WNI) (only for Brivo OEC 865)
‒ Two-pedal Footswitch