GE Brivo OEC 715 - Monitor Brightness and Contrast Adjustment; Keys Assignment and Operation LED; Lock and Unlock the OSD Menu; Key Functions in the OSD Menu

Calibration
4-65
4.8. Monitor Brightness and Contrast Adjustment
4.8.1. Keys assignment and operation LED
A “dynamic help for keypad function” is available for each menu. It explains the role of each Key on the
OSD menu window, which is currently active.
4.8.2. Lock and unlock the OSD menu
Action
Key sequence
Lock OSD menu (except hotkeys
if enabled)
Press key Exit and Up Up Up in 3 seconds,
when keys are unlocked.
Unlock OSD menu (except
hotkeys if enabled)
Press key Exit and Up Up Up in 3 seconds,
when keys are locked
4.8.3. Key functions in the OSD menu
Key(s)
Situation
Action
Menu
Always
Jump to next line
Up
Slide controller
Increase value
Selection point
To previous selection
Command
"Enter key"
Down
Slide controller
Decrease value
Selection point
To subsequent selection
Exit
Except "Exit OSD" menu
One menu level upwards (settings are
retained)
In "Exit OSD" menu
Return to main menu (settings are retained)