Installation
3-59
8. Press the menu button and scroll down or up to select corresponding legacy driver for new Sony
printer.
DRV: 897 for
UP-D898MD/ UP-X898MD
DRV: 970 for
UP-971AD
DRV: 990 for UP-991AD
9. Functional check: Power on the system. Set the switch at back of printer to digital mode. Turn on the
printer. Verify that an image can be printed to the printer and the printer works with paper or film.
The Video Printer is not fixed in the cabinet. Please pay attention when moving the
WorkStation.
The power and video signal of the Printer is provided by system. Please do not connect
the power supply and video to other printer. Please do not connect other external power
supply and video signal to this printer. Otherwise, it may cause electrical shock to user.
3.7.5. Film cassette holder
Please follow the steps below to install and remove the cassette holder:
1. Place the cassette holder over the face of the image intensifier with the handle opened out.
2. Rotate the cassette holder handle to securely attach the cassette holder to the image intensifier.
Verify that the cassette holder is securely attached to the image intensifier.
Unsecured cassette holders may fall, injuring patients or personnel.
3. Insert a film cassette into the cassette holder and center it.
To Next Page
Loading...
