GE Brivo OEC 715 - Page 364

Brivo OEC 715/785/865 Mobile C-Arm X-Ray Product Service Manual
6-30
Exception
ID
Error
Warning
Exception
Description
(In system Log)
Message
(Displayed in User Interface)
Diagnosis Reference
exception
0312511
Error
MiniImageDirec
tory module
unregister OSGI
service
exception
Workstation communication
exception. Please restart the
system. If this issue persists,
please call for service.
0312512
Error
MiniImageDirec
tory module
unregister
CORBA servant
exception
Workstation communication
exception. Please restart the
system. If this issue persists,
please call for service.
0301501
Warning
Get image and
overlay from IE
failed
Workstation communication
exception. Can’t get image and
overlay from the left monitor.
Please restart the system. If
this issue persists, please call
for service.
1. Restart the system.
2. If not work, re-install
Workstation software.
0301502
Warning
Set annotation
to IE failed
Workstation communication
exception. Can’t set annotation
data to the left monitor. Please
restart the system. If this issue
persists, please call for service.
1. Restart the system.
2. If not work, re-install
Workstation software.
0301503
Warning
Set crop to IE
failed
Workstation communication
exception. Can’t set crop to the
left monitor. Please restart the
system. If this issue persists,
please call for service.
1. Restart the system.
2. If not work, re-install
Workstation software.
0301504
Error
Annotation
module register
servant
exception
Workstation communication
exception. Please restart the
system. If this issue persists,
please call for service.
1. Restart the system.
2. If not work, re-install
Workstation software.
0301505
Error
Annotation
module
subscribe sync
event exception
Workstation communication
exception. Please restart the
system. If this issue persists,
please call for service.
1. Restart the system.
2. If not work, re-install
Workstation software.
0301506
Error
Annotation
module
unsubscribe
sync event
Workstation communication
exception. Please restart the
system. If this issue persists,
please call for service.
1. Restart the system.
2. If not work, re-install
Workstation software.