x/EN TS/Na7
MiCOM P74
Hex Code Decimal Code Meaning
0x0C160013 202768403 The continuous self-checks h
ave found an error in
the code comparison. Check the Flash EPROM on
the main processor board, and then try downloading
a new program.
0x0C160014 202768404 The continuous self-
checks have found an error in
the battery backed SRAM. Check the battery, then
the RAM on the main processor board.
0x0C160015 202768405 The continuous self-
checks have found an error in
the EEPROM. Check the EEPROM on the main
processor board.
0x0C1600A0 202768544 The continuous self-
checks have found an error on
the acquisition board. Check the input board.
0x0C170016 202833942
Secondary initialisation tests detected a fast
watchdog failure. Check the Flash EPROM on the
main processor board.
0x0C170017 202833943
Secondary initialisation tests detected a battery
backed SRAM failur
e. Check the battery backed
SRAM on the main processor board.
0x0C170018 202833944
Secondary initialisation tests detected a bus reset
test failure. Check the main processor board.
0x0C170019 202833945
Secondary initialisation tests detected a slow
watchdog failure.
0x0E020000 235012096
Excessive number of gates in PSL. Restore defaults
and download new PSL.
0x0E080000 235405312
PSL excessive execution time. Restore defaults and
download new PSL.
Table 5: Error Codes
Other error codes relate to problems within the main processor board software. It will be
necessary to contact GE with details of the problem for a full analysis.
EXTENDED LIST:
Hexa Code
Problem Verify or modify
Software initialisation error
Software initialisation error
Software initialisation error
Software initialisation error
Software initialisation error
Software initialisation error
Software initialisation error
Software initialisation error
Software initialisation error
Software initialisation error
Software initialisation error
Software initialisation error
Software initialisation error
Software initialisation error
Software initialisation error
To Next Page
Loading...
