GE P742

Commissioning
P74x/EN CM/Na7
MiCOM P741, P742, P743
(CM) 10-43
CM
5 Setting Checks
Complete or delete as appropriate
5.1 Application-specific function settings applied? Yes / No
Application-specific programmable scheme logic
settings applied (na = not applicable)?
Yes / No / na
5.2.1.2 Current Differential lower slope pickup ________________A
5.2.1.3 Current Differential upper slope pickup ________________A
5.2.5 Protection function timing tested? Yes / No
Applied current ________________A
Expected operating time ________________s
Measured operating time ________________s
5.4 Application-specific function settings verified? Yes / No / na
Application-specific programmable scheme logic
tested?
Yes / No / na
Signal strength received by P742/3
Channel 1 __________dBm / na
Signal strength transmitted by 742/3
Channel 1 __________dBm / na
Signal Strength within tolerance Yes / No / na
Optical fibres reconnected?
Channel RX and TX Yes / No
Alarms reset? Yes / No