GE MEDICAL SYSTEMS
D
IRECTION 2392751-100, REVISION 3VIVID™ 4 SERVICE MANUAL
Chapter 8 - Replacement Procedures 8-109
Figure 8-97 Removing the Transverse Arm
6) Remove the four bolts (three wrench bolts and one Allen bolt - see Figure 8-98 below) that secure
one of the front wheels to the chassis, and remove the wheel.
7.) Proceed to step 1 of the Front Wheel Installation - Procedure 2 on page 8 - 110 to install a new front
wheel in place of the one removed.
8.) Repeat step 6 above, to remove the other front wheel from the chassis.
9.) Proceed to step 2 of the Front Wheel Installation - Procedure 2 on page 8 - 110, to install the second
new front wheel, then complete the remaining steps of the front wheel installation procedure.
Figure 8-98 Front Wheel (Part No 2392789) Bolted to Chassis
Transverse Arm
(Wheel Position Bar)
Securing Bolts
To Next Page
Loading...
