GE MEDICAL SYSTEMS
D
IRECTION 2392751-100, REVISION 3VIVID™ 4 SERVICE MANUAL
8-120 Section 8-8 - Peripherals
5.) Power ON the VCR by pushing the power switch on VCR front panel.
6.) Press Config then, from the System Configuration window, activate the VCR / ECG tab.
7.) Under the VCR Options list, choose Mitsubishi from the VCR model drop-down list (Figure 8-109).
Figure 8-108 Mitsubishi VCR Front Panel - Power Switch
Figure 8-109 Selecting VCR Model - Mitsubishi
Power ON/OFF Switch
To Next Page
Loading...
