GE MEDICAL SYSTEMS
D
IRECTION 2392751-100, REVISION 3VIVID™ 4 SERVICE MANUAL
8-128 Section 8-8 - Peripherals
2.) Connect the RS-232C cable, the Audio and S-Video IN and OUT cables, and the Power cord, as
shown in Figure 8-122 below.
.
3.) Place the VCR in its correct final position.
4.) Secure the VCR by fastening the belt around it, or together with the B/W Printer (if present).
5.) If more secure fastening is desired, install the optional shelf (P/N H45011CN), which can be ordered
separately if the Color Printer option is not installed.
Figure 8-122 Sony VCR Connection Cables
AUDIO IN cable
From: Left Connectors Panel:
To: VCR Audio Input:
Out-R Connector (Red)
Out-L Connector (Black)
BLACK: CH1
RED: CH2
RED
BLACK
RED
BLACK
AUDIO OUT cable
From: Left Connectors Panel:
To: VCR Audio Output:
IN-R Connector (Red)
IN-L Connector (Black)
BLACK: CH1
RED: CH2
S-VIDEO OUT cable
From: Left Connectors Panel,
S-Video OUT
To: VCR S-Video IN
To: S-Video Output
S-VIDEO IN cable
From: Left Connectors
Panel,
S-Video OUT
To: VCR S-Video IN
Power cord
From: Left Connectors
Panel AC OUT
To: VCR AC IN
RS-232 cable
From: Left Connectors Panel,
Connector RS-232(1)
To: VCR RS-232C Input
Dip Switches Panel
Up = ON
Down = OFF
VIDEO IN
AUDIO
IN
S
VIDEO
AC IN
AUDIO
OUT
S
VIDEO
CH1
CH2
CH1
CH2
To Next Page
Loading...
