GE MEDICAL SYSTEMS
D
IRECTION 2392751-100, REVISION 3VIVID™ 4 SERVICE MANUAL
Chapter 8 - Replacement Procedures 8-137
7) Connect the RGB and SYNC cables, Color Printer Remote cable, and AC power cable (hanging out
of the Bottom Metal Cover slot - see Figure 8-129 on page 8-136), to the UP-21MD Color Video
Printer, as shown in the diagram in Figure 8-131 below.
Figure 8-131 Sony UP-21MD Color Video Printer Connection Cables
R, G, B and SYNC cables:
To: UP-21MD Color Video Printer
INPUT R, G/G-SYNC, B and SYNC
BNC Connectors
REMOTE cable:
To: UP-21MD Color Video
Printer REMOTE 2 Connector
NTSC/PAL
selector
Power cord:
To: UP-21MD Color
Video Printer AC IN
To Next Page
Loading...
