IP8820/IP8830/IP8840
Installer Guide
D-5
Section
Field Name
Description
dst_auto_adjust Enables automatic daylight savings time (DST) adjustment
by the phone.
Valid values are 0 (disabled) or 1 (enabled).
Default is 1.
dst_start_month Sets month DST starts.
Valid values are 1 to 12, with 1 being January and 12 being
December.
Default is 3 in the United States.
dst_start_day Sets day of the month DST starts.
Valid values are the following:
• 1 to 31 (for day of the month)
• 0 (use value in the dst_start_day_of_week parameter)
Default is 0.
dst_start_day_of_week Sets day of the week DST begins.
Valid values are 1 to 7 (1 is Sunday; 7 is Saturday).
Default is 1 in the United States
dst_start_week_of_month Optional parameter for week of month DST begins.
Valid values are 1 to 6 and 7. One (1) is the first week; each
subsequent number is the subsequent week. Seven (7) is the
last week of the month regardless of which week the last
week is.
Default is 2 for the United States.
dst_start_time Sets the hour of the day DST begins.
Valid values are 0 to 23.
The default is 2 for the United States.
dst_stop_month Sets month DST ends.
Valid values are 1 to 12 with 1 being January and 12 being
December.
The default is 11 for the United States.
dst_stop_day Sets day of the month DST ends.
Valid values are as follows:
• 1 to 31 (for the days of the month)
• 0 (use the value in the dst_stop_day_of_week parameter)
The default is 0.
dst_stop_day_of_week Sets day of the week DST ends.
Valid values are 1 to 7, with 1 being Sunday and 7 being
Saturday.
The default is 1 for the United States.
dst_stop_week_of_month Sets week of month DST ends.
Valid values are 1 to 6 and 7, with 1 being the first week,
each number thereafter being subsequent weeks. Seven (7)
represents the last week in the month
The default is 1 for the United States.
dst_stop_time Sets the hour of the day DST ends.
Valid values are 0 to 23.
The default is 2 for the United States.
VOIP
outbound_proxy_server When defined, sends all SIP requests to the outbound proxy
server instead of to the linen_proxy_address. The media
stream is not routed through the outbound proxy.
The valid value is an IP address or FQDN up to 60
characters.
Default is blank