IP8820/IP8830/IP8840
Installer Guide
D-6
Section
Field Name
Description
outbound_proxy_port
Defines the port number of the outbound proxy server.
Valid values are 1024 to 32000.
Default is 5060.
backup_proxy_server
Defines a backup proxy server in case the outbound proxy
server fails.
The valid value is an IP address or FQDN up to 60
characters.
Default is blank
back_proxy_port
Defines the port number of the backup proxy server.
Valid values are 1024 to 32000.
Default is 5060.
message_url
Defines the voice mail address, IP address or phone number
format.
The valid value is an IP address or telephone number up to
50 characters.
Default is blank.
SIP_service_domain
Specifies the SIP service domain.
The valid value is an IP address or FQDN up to 60
characters.
The default is blank.
preferred_codec
Defines the order of priority of codecs for negotiation.
Valid values are g729, g723, pcmu and pcma, g722.
The default order of priority is g729 g723 pcmu pcma g722.
rtp_port
Defines the RTP port for media packets.
Valid values are from 16300 to 32700.
The default is 23000.
outbound_proxy_register
Enables use of proxy server for SIP requests.
Valid values are enable or disable.
The default is enable.
prack_mode
Disables the use of ACK response to provide reliable
response to SIP requests.
Valid values are enable or disable.
Default is disable.
user_param
Defines “user=phone” parameter in the To, From, and
Contact headers of REGISTER messages.
Valid values are disable and enable.
Default is disable.
replaces_mode
Enables use of the SIP “Replace” header.
Valid values are enable or disable.
Default is enable.
local_udp_port
Defines UDP port used for SIP messages.
Valid values are from 1024 to 32000.
Default is 5060.
timer_register_expires
Defines time, in seconds, that a registration expires and re-
registration is required. The Expire header in the registration
message includes this value. A value of ‘0’ is a de-
registration.
Valid values are 0 to 86400.
Default is 3600.
timer_session
Specifies the SIP session time, in seconds.
Valid values are 0 to 640.
Default is 0.
To Next Page
Loading...