IP8820/IP8830/IP8840
Installer Guide
D-10
Section
Field Name
Description
headset
Specifies the gain level for the wired headset connected to
the phone.
Valid values are 1 through 11.
The default is 6.
ring
Specifies the gain level for the phone’s ring.
Valid values are 1 through 11.
The default is 6.
lcd
Specifies the contrast level for the phone’s LCD.
Valid values are 1 through 7.
The default is 4.
ringer_off
Toggles the ringer on and off.
Valid values are 1 (on) and 0 (off).
The default is 1 (on).
VAD
Sets voice activation detection (VAD).
Valid values are 1 (on) and 0 (off).
The default is 0.
ring_type Specifies the default ring type for the IP Phone. Ring type
can be a value from 1 to 4, 101 to 105, or 201 to 205:
• 1 ~ 4, ring type 1 to 4 (tone ring),
• 101 ~ 105, ring type 101 to 105 (wav file ring),
• 201 ~ 205, ring type 201 to 205 (user defined ring),
Valid values are 1 to 4, 101 to 105, and 201 to 205.
The default is 1.
ringdata
Sets the user defined ring (RTTTL-format), see Appendix G.
The valid value is a maximum of 512 characters for each
ring.
The maximum number of ringdata is 5.
Default is blank.
dtmf_payload
Sets the DTMF payload type for RFC2833.
Valid values are 96 through 255.
The default is 101.
dtmf_duration
Sets the DTMF duration.
Valid values are 50 through 300 ms.
The default is 120.
cadence0
Sets the ring cadence for calls with undefined in Alert Info
header.
The valid value is a six value time array (on off on off on off).
The valid range is 0 to 30000 milliseconds total time.
The default is 2000-4000-0-0-0-0.
cadence1
Sets the ring cadence for calls with External call in Alert Info
header.
The valid value is a six value time array (on off on off on off).
The valid range is 0 to 30000 milliseconds total time.
The default is 800-400-800-4000-0-0.
cadence2
Sets the ring cadence for calls with Group call in Alert Info
header.
The valid value is a six value time array (on off on off on off).
The valid range is 0 to 30000 milliseconds total time.
The default is 400-200-400-200-800-4000.
To Next Page
Loading...