1-18
# Specify the entity for certificate request as aaa.
[Switch-pki-domain-torsa] certificate request entity aaa
z Generate a local key pair using RSA
[Switch] public-key local create rsa
The range of public key size is (512 ~ 2048).
NOTES: If the key modulus is greater than 512,
It may take a few minutes.
Input the bits in the modulus [default = 1024]:
Generating keys...
........++++++
....................................++++++
.......++++++++
......................++++++++
.
z Apply for certificates
# Retrieve the CA certificate and save it locally.
[Switch] pki retrieval-certificate ca domain torsa
Retrieving CA/RA certificates. Please wait a while......
The trusted CA's finger print is:
MD5 fingerprint:766C D2C8 9E46 845B 4DCE 439C 1C1F 83AB
SHA1 fingerprint:97E5 DDED AB39 3141 75FB DB5C E7F8 D7D7 7C9B 97B4
Is the finger print correct?(Y/N):y
Saving CA/RA certificates chain, please wait a moment......
CA certificates retrieval success.
# Request a local certificate manually.
[Switch] pki request-certificate domain torsa challenge-word
Certificate is being requested, please wait......
Certificate request Successfully!
Saving the local certificate to device......
Done!
3) Verify your configuration
# Use the following command to view information about the local certificate acquired.
<Switch> display pki certificate local domain torsa
Certificate:
Data:
Version: 3 (0x2)
Serial Number:
48FA0FD9 00000000 000C
Signature Algorithm: sha1WithRSAEncryption
Issuer:
CN=CA server
Validity
Not Before: Nov 21 12:32:16 2007 GMT
Not After : Nov 21 12:42:16 2008 GMT
To Next Page
Loading...
Need help?
General