1-2
BOOT Menu
Starting......
***********************************************************
* *
* H3C S3100-26TP-EI-W BOOTROM, Version 506 *
* *
***********************************************************
Copyright(c) 2004-2007 Hangzhou H3C Technologies Co., Ltd.
Creation date : Apr 17 2007, 10:12:36
CPU Clock Speed : 200MHz
BUS Clock Speed : 33MHz
Memory Size : 64MB
Mac Address : 000fe2123456
Press Ctrl-B to enter Boot Menu...
Press <Ctrl+B>. The system displays:
Password :
To enter the BOOT menu, you should press <Ctrl+B> within five seconds ( full startup mode ) or one
second (fast startup mode) after the information “Press Ctrl-B to enter BOOT Menu...” displays.
Otherwise, the system starts to extract the program; and if you want to enter the BOOT Menu at this
time, you will have to restart the switch.
Enter the correct Boot ROM password (no password is set by default). The system enters the BOOT
Menu:
BOOT MENU
1. Download application file to flash
2. Select application file to boot
3. Display all files in flash
4. Delete file from flash
5. Modify bootrom password
6. Enter bootrom upgrade menu
7. Skip current configuration file
8. Set bootrom password recovery
9. Set switch startup mode
0. Reboot
Enter your choice(0-9):
To Next Page
Loading...
Need help?
General