H3C S3100 Series User Manual

5-2
Specify the time delay to execute the commands in the task
Follow these steps to configure a scheduled task:
To do… Use the command… Description
Enter system view
system-view
—
Create a scheduled task, and enter
scheduled task view
job
job-name Required
Configure the view where the
specified commands are to be
executed
view
view Required
Execute the commands at a
specified time delay
time
time-id {
one-off
|
repeating
}
delay
time
command
command
Required
Display information about a
scheduled task
display job
[ job-name ] Available in any view
z You can specify only one view for each scheduled task.
z After a scheduled task is configured, modification of the system time will affect the execution of the
task. However, as the delay keyword is unrelated to the system time, even though the system time
changes, the specified command is still executed after a specified interval.
Scheduled Task Configuration Example
Network requirements
Configure Switch so that the IP phones connected to the port of Switch are available from eight AM to
six PM from Monday to Friday.
Figure 5-1 Network diagram for scheduled task configuration
Configuration procedure
<Switch> system-view
# Create scheduled task phone1, and enter scheduled task view.

H3C S3100 Series Specifications

General

Brand	H3C
Model	S3100 Series
Category	Switch
Language	English