1-4
z While the reset saved-configuration [ main ] command erases the configuration file with main
attribute, it only erases the main attribute of a configuration file having both main and backup
attribute.
z While the reset saved-configuration backup command erases the configuration file with backup
attribute, it only erases the backup attribute of a configuration file having both main and backup
attribute.
This command will permanently delete the configuration file from the device.
Specifying a Configuration File for Next Startup
Table 1-4 Specify a configuration file for next startup
Operation Command Description
Specify a configuration file for next
startup
startup
saved-configuration
cfgfile [
backup
|
main
]
Required
Available in user view
You can specify a configuration file to be used for the next startup and configure the main/backup
attribute for the configuration file.
Assign main attribute to the startup configuration file
z If you save the current configuration to the main configuration file, the system will automatically set
the file as the main startup configuration file.
z You can also use the startup saved-configuration cfgfile [ main ] command to set the file as main
startup configuration file.
Assign backup attribute to the startup configuration file
z If you save the current configuration to the backup configuration file, the system will automatically
set the file as the backup startup configuration file.
z You can also use the startup saved-configuration cfgfile backup command to set the file as
backup startup configuration file.
The configuration file must use “.cfg” as its extension name and the startup configuration file must be
saved at the root directory of the device.
To Next Page
Loading...
Need help?
General