H3C S3100 Series User Manual

1-2
FTP Configuration
Table 1-2 FTP configuration tasks
Item Configuration task Description
Creating an FTP user Required
Enabling an FTP server Required
Configuring connection idle time Optional
Disconnecting a specified user Optional
Configuring the banner for an FTP server Optional
FTP Configuration: A Switch Operating
as an FTP Server
Displaying FTP server information Optional
FTP Configuration: A Switch Operating
as an FTP Client
Basic configurations on an FTP client —
FTP Configuration: A Switch Operating as an FTP Server
Creating an FTP user
Configure the user name and password for the FTP user and set the service type to FTP. To use FTP
services, a user must provide a user name and password for being authenticated by the FTP server.
Only users that pass the authentication have access to the FTP server.
Table 1-3 Create an FTP user
Operation Command Description
Enter system view
system-view
—
Add a local user and enter local
user view
local-user
user-name
Required
By default, no local user is
configured.
Configure a password for the
specified user
password
{
simple
|
cipher
}
password
Optional
By default, no password is
configured.
Configure the service type as FTP
service-type ftp
Required
By default, no service is
configured.
Enabling an FTP server
Table 1-4 Enable an FTP server
Operation Command Description
Enter system view
system-view
—
Enable the FTP server function
ftp server enable
Required
Disabled by default.

H3C S3100 Series Specifications

General

Brand	H3C
Model	S3100 Series
Category	Switch
Language	English