1-24
# Start the test.
[Sysname-hwping-administrator-ftp] test-enable
# Display test results
[Sysname-hwping-administrator-ftp] display hwping results administrator ftp
HWPing entry(admin administrator, tag ftp) test result:
Destination ip address:10.2.2.2
Send operation times: 10 Receive response times: 10
Min/Max/Average Round Trip Time: 3245/15891/12157
Square-Sum of Round Trip Time: 1644458573
Last complete test time: 2000-4-3 4:0:34.6
Extend result:
SD Maximal delay: 0 DS Maximal delay: 0
Packet lost in test: 0%
Disconnect operation number: 0 Operation timeout number: 0
System busy operation number: 0 Connection fail number: 0
Operation sequence errors: 0 Drop operation number: 0
Other operation errors: 0
[Sysname-hwping-administrator-ftp] display hwping history administrator ftp
HWPing entry(admin administrator, tag ftp) history record:
Index Response Status LastRC Time
1 15822 1 0 2000-04-03 04:00:34.6
2 15772 1 0 2000-04-03 04:00:18.8
3 9945 1 0 2000-04-03 04:00:02.9
4 15891 1 0 2000-04-03 03:59:52.9
5 15772 1 0 2000-04-03 03:59:37.0
6 15653 1 0 2000-04-03 03:59:21.2
7 9792 1 0 2000-04-03 03:59:05.5
8 9794 1 0 2000-04-03 03:58:55.6
9 9891 1 0 2000-04-03 03:58:45.8
10 3245 1 0 2000-04-03 03:58:35.9
For detailed output description, see the corresponding command manual.
If you are downloading a file from the server, you do not need to specify an FTP operation type. For
details, see section
Configuring FTP test on HWPing client.
HTTP Test
Network requirements
An H3C S3100 series Ethernet switch serves as the HWPing client, and a PC serves as the HTTP
server. Perform an HWPing HTTP test between the switch and the HTTP server to test the connectivity
and the time required to download a file from the HTTP server after the connection to the server is
established.