H3C S3100 Series

1-26
bytes=56 Sequence=3 hop limit=64 time = 6 ms
Reply from FE80::2E0:FCFF:FE00:2006
bytes=56 Sequence=4 hop limit=64 time = 7 ms
Reply from FE80::2E0:FCFF:FE00:2006
bytes=56 Sequence=5 hop limit=64 time = 14 ms
--- FE80::2E0:FCFF:FE00:2006 ping statistics ---
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 6/22/77 ms
[SwitchA-Vlan-interface1] ping ipv6 3001::2
PING 3001::2 : 56 data bytes, press CTRL_C to break
Reply from 3001::2
bytes=56 Sequence=1 hop limit=64 time = 79 ms
Reply from 3001::2
bytes=56 Sequence=2 hop limit=64 time = 6 ms
Reply from 3001::2
bytes=56 Sequence=3 hop limit=64 time = 6 ms
Reply from 3001::2
bytes=56 Sequence=4 hop limit=64 time = 5 ms
Reply from 3001::2
bytes=56 Sequence=5 hop limit=64 time = 6 ms
--- 3001::2 ping statistics ---
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 5/20/79 ms
DHCPv6 Snooping Configuration Example
Network requirements
z As shown in Figure 1-9, Switch A is connected to a DHCPv6 server through Ethernet 1/0/1, and to
two DHCPv6 clients through Ethernet 1/0/2 and Ethernet 1/0/3.
z Ethernet 1/0/1 forwards DHCPv6 server responses while the other two do not.
z Switch A records clients’ IPv6-to-MAC address bindings.
Figure 1-9 Network diagram for DHCPv6 snooping configuration