EasyManuals Logo

H3C S3100 Series User Manual

H3C S3100 Series
1057 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #302 background imageLoading...
Page #302 background image
2-15
Operation Command Remarks
Enable IGMP Snooping
igmp-snooping enable
—
Enter VLAN view
vlan
vlan-id
—
Enable IGMP Snooping
igmp-snooping enable
Required
Enable multicast VLAN
service-type multicast
Required
Return to system view
quit
—
Enter Ethernet port view for the
Layer 3 switch
interface
interface-type
interface-number
—
Define the port as a trunk or hybrid
port
port link-type
{
trunk | hybrid
}
Required
port
hybrid
vlan
vlan-list {
tagged
|
untagged
}
Specify the VLANs to be allowed to
pass the Ethernet port
port
trunk
permit
vlan
vlan-list
Required
The multicast VLAN must be
included, and the port must be
configured to forward tagged
packets for the multicast VLAN if
the port type is hybrid.
Enter Ethernet port view for a user
device
interface
interface-type
interface-number
—
Define the port as a hybrid port
port link-type
hybrid
Required
Specify the VLANs to be allowed to
pass the port
port hybrid
vlan
vlan-id-list
{
tagged
|
untagged
}
Required
The multicast VLAN must be
included, and the port must be
configured to forward tagged
packets for the multicast VLAN.
z One port can belong to only one multicast VLAN.
z The port connected to a user terminal must be a hybrid port.
z The multicast member ports must be in the same VLAN with the router port. Otherwise, the
multicast member port cannot receive multicast packets.
z If a router port is in a multicast VLAN, the router port must be configured as a trunk port or a hybrid
port that allows tagged packets to pass for the multicast VLAN. Otherwise, all the multicast
member ports in this multicast VLAN cannot receive multicast packets.
z The multicast VLAN function and the VLAN mapping function cannot be configured at the same
time.
Displaying and Maintaining IGMP Snooping
After the configuration above, you can execute the following display commands in any view to verify
the configuration by checking the displayed information.
You can execute the reset command in user view to clear the statistics information about IGMP
Snooping.

Table of Contents

Other manuals for H3C S3100 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the H3C S3100 Series and is the answer not in the manual?

H3C S3100 Series Specifications

General IconGeneral
BrandH3C
ModelS3100 Series
CategorySwitch
LanguageEnglish

Related product manuals