1-8
Configuring the Voice VLAN to Operate in Automatic Voice VLAN Assignment
Mode
Follow these steps to configure a voice VLAN to operate in automatic voice VLAN assignment mode:
To do… Use the command… Remarks
Enter system view
system-view
—
Set an OUI address that can be
identified by the voice VLAN
voice vlan mac-address
oui
mask
oui-mask
[
description
text
]
Optional
By default, the switch determines
the voice traffic according to the
default OUI address.
Enable the voice VLAN security
mode
voice vlan security enable
Optional
By default, the voice VLAN security
mode is enabled.
Set the voice VLAN aging timer
voice vlan aging
minutes
Optional
The default aging timer is 1440
minutes.
Enable the voice VLAN function
globally
voice vlan
vlan-id
enable
Required
Enter Ethernet port view
interface
interface-type
interface-number
Required
Enable the voice VLAN function on
a port
voice vlan enable
Required
By default, voice VLAN is disabled.
Enable the voice VLAN legacy
function on the port
voice vlan legacy
Optional
By default, voice VLAN legacy is
disabled.
Set the voice VLAN assignment
mode of the port to automatic
voice vlan mode auto
Optional
The default voice VLAN
assignment mode on a port is
automatic.
z A port working in automatic voice VLAN assignment mode cannot be assigned to the voice VLAN
manually. Therefore, if a VLAN is configured as the voice VLAN and a protocol-based VLAN at the
same time, the protocol-based VLAN function cannot be bound with the port. For information about
protocol-based VLANs, refer to VLAN Configuration in this manual.
z For a port operating in automatic voice VLAN assignment mode, its default VLAN cannot be
configured as the voice VLAN; otherwise the system prompts you for unsuccessful configuration.
To Next Page
Loading...
Need help?
General