H3C S3100 Series User Manual

2-20
To do… Use the command… Remarks
Configure
multiple
interfaces in
system view
dhcp server nbns-list ip-address&<1-8>
{ interface interface-type interface-number [ to
interface-type interface-number ] | all }
configured.
interface interface-type interface-number
dhcp server netbios-type { b-node | h-node |
m-node | p-node }
Configure the
current
interface
quit
Configure a
NetBIOS
node type for
DHCP clients
Configure
multiple
interfaces in
system view
dhcp server netbios-type { b-node | h-node |
m-node | p-node } { interface interface-type
interface-number [ to interface-type
interface-number ] | all }
Required
By default, no
NetBIOS node
type is specified.
If b-node is specified for the client, you don’t need to specify any WINS server address.
Configuring BIMS Server Information for the DHCP Client
A DHCP client performs regular software update and backup using configuration files obtained from a
BIMS server. Therefore, the DHCP server needs to offer DHCP clients the BIMS server IP address, port
number, shared key from the DHCP address pool.
Follow these steps to configure BIMS server information for the DHCP client:
To do… Use the command… Remarks
Enter system view
system-view
—
Configure the BIMS server
information to be assigned to
the DHCP client
dhcp server bims-server ip
ip-address [ port port-number ]
sharekey key { interface interface-type
interface-number [ to interface-type
interface-number ] | all }
Required
By default, no BIMS
server information is
configured.
Configuring Option 184 Parameters for the Client with Voice Service
For details about Option 184, refer to Configuring Option 184 Parameters for the Client with Voice
Service
.

H3C S3100 Series Specifications

General

Brand	H3C
Model	S3100 Series
Category	Switch
Language	English