1-1
1 File System Management Configuration
File System Configuration
Introduction to File System
To facilitate management on the switch memory, S3100 series Ethernet switches provide the file system
function, allowing you to access and manage the files and directories. You can create, remove, copy or
delete a file through command lines, and you can manage files using directories.
File System Configuration Tasks
Table 1-1 Configuration tasks on the file system
Operation Remarks
Directory Operations Optional
File Operations Optional
Flash Memory Operations Optional
Prompt Mode Configuration Optional
S3100 series Ethernet switches allow you to input a file path and file name in one of the following ways:
z In universal resource locator (URL) format and starting with “unit1>flash:/”. or “flash:/” This method
is used to specify a file in the current Flash memory. For example, the URL of a file named text.txt
in the root directory of the switch is unit1>flash:/text.txt or flash:/text.txt.
z Entering the path name or file name directly. This method can be used to specify a path or a file in
the current work directory. For example, to access file text.txt in the current directory, you can
directly input the file name text.txt as the file URL.
Directory Operations
The file system provides directory-related functions, such as:
z Creating/deleting a directory
z Displaying the current work directory, or contents in a specified directory
Table 1-2 describes the directory-related operations.
Perform the following configuration in user view.
To Next Page
Loading...
Need help?
General