H3C S3100 Series User Manual

2-13
Operation Command Remarks
Enable RADIUS
authentication port
radius client enable
Optional
By default, RADIUS authentication port is
enabled.
Create a RADIUS scheme
and enter its view
radius scheme
radius-scheme-name
Required
By default, a RADIUS scheme named
"system" has already been created in the
system.
A RADIUS scheme can be referenced by multiple ISP domains simultaneously.
Configuring RADIUS Authentication/Authorization Servers
Table 2-12 Configure RADIUS authentication/authorization servers
Operation Command Remarks
Enter system view
system-view
—
Create a RADIUS scheme and
enter its view
radius scheme
radius-scheme-name
Required
By default, a RADIUS scheme
named "system" has already
been created in the system.
Set the IP address and port
number of the primary RADIUS
authentication/authorization
server
primary authentication
{ ip-address | ipv6
ipv6-address } [ port-number ]
[ key string ]
Required
By default, the IP address and
UDP port number of the
primary server are 0.0.0.0 and
1812 respectively for a newly
created RADIUS scheme.
Set the IP address and port
number of the secondary
RADIUS
authentication/authorization
server
secondary authentication
{ ip-address | ipv6
ipv6-address } [ port-number ]
[ key string ]
Optional
By default, the IP address and
UDP port number of the
secondary server are 0.0.0.0
and 1812 respectively for a
newly created RADIUS
scheme.

H3C S3100 Series Specifications

General

Brand	H3C
Model	S3100 Series
Category	Switch
Language	English