H3C S3100 Series User Manual

2-25
HWTACACS Configuration Task List
Table 2-24 HWTACACS configuration tasks
Task Remarks
Creating an HWTACACS Scheme Required
Configuring TACACS Authentication Servers Required
Configuring TACACS Authorization Servers Required
Configuring TACACS Accounting Servers Optional
Configuring Shared Keys for RADIUS Messages Optional
Configuring the Attributes of Data to be Sent to TACACS
Servers
Optional
Configuring the
TACACS client
Configuring the Timers Regarding TACACS Servers Optional
Configuring the
TACACS server
Refer to the configuration of TACACS servers. —
Creating an HWTACACS Scheme
The HWTACACS protocol configuration is performed on a scheme basis. Therefore, you must create
an HWTACACS scheme and enter HWTACACS view before performing other configuration tasks.
Table 2-25 Create an HWTACACS scheme
Operation Command Remarks
Enter system view
system-view
—
Create an HWTACACS
scheme and enter its view
hwtacacs scheme
hwtacacs-scheme-name
Required
By default, no HWTACACS
scheme exists.
The system supports up to 16 HWTACACS schemes. You can delete an HWTACACS scheme only
when it is not referenced.
Configuring TACACS Authentication Servers
Table 2-26 Configure TACACS authentication servers
Operation Command Remarks
Enter system view
system-view
—
Create an HWTACACS
scheme and enter its view
hwtacacs scheme
hwtacacs-scheme-name
Required
By default, no HWTACACS
scheme exists.

H3C S3100 Series Specifications

General

Brand	H3C
Model	S3100 Series
Category	Switch
Language	English