EasyManuals Logo

H3C S3100 Series User Manual

H3C S3100 Series
1057 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #21 background imageLoading...
Page #21 background image
1-8
Table 1-2 lists the CLI views provided by S3100 series Ethernet switches, operations that can be
performed in different CLI views and the commands used to enter specific CLI views.
Table 1-2 CLI views
View
Available
operation
Prompt example Enter method Quit method
User view
Display
operation status
and statistical
information of
the switch
<Sysname>
Enter user view once
logging into the switch.
Execute the quit
command to log
out of the
switch.
System
view
Configure
system
parameters
[Sysname]
Execute the system-view
command in user view.
Execute the
quit or return
command to
return to user
view.
100 Mbps
Ethernet port
view:
[Sysname-Ethern
et1/0/1]
Execute the interface
ethernet command in
system view.
Ethernet
port view
Configure
Ethernet port
parameters
1000 Mbps
Ethernet port
view:
[Sysname-Gigabi
tEthernet1/1/1]
Execute the interface
gigabitethernet command
in system view.
Aux1/0/0
port (the
console
port) view
The S3100
series do not
support
configuration on
port Aux1/0/0
[Sysname-Aux1/
0/0]
Execute the interface aux
1/0/0 command in system
view
VLAN view
Configure VLAN
parameters
[Sysname-vlan1]
Execute the vlan
command in system view.
VLAN
interface
view
Configure VLAN
interface
parameters,
including the
management
VLAN
parameters
[Sysname-Vlan-i
nterface1]
Execute the interface
Vlan-interface command
in system view.
Loopback
interface
view
Configure
loopback
interface
parameters
[Sysname-LoopB
ack0]
Execute the interface
loopback command in
system view.
NULL
interface
view
Configure NULL
interface
parameters
[Sysname-NULL
0]
Execute the interface null
command in system view.
Local user
view
Configure local
user parameters
[Sysname-luser-u
ser1]
Execute the local-user
command in system view.
User
interface
view
Configure user
interface
parameters
[Sysname-ui-aux
0]
Execute the
user-interface command
in system view.
Execute the
quit command
to return to
system view.
Execute the
return
command to
return to user
view.

Table of Contents

Other manuals for H3C S3100 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the H3C S3100 Series and is the answer not in the manual?

H3C S3100 Series Specifications

General IconGeneral
BrandH3C
ModelS3100 Series
CategorySwitch
LanguageEnglish

Related product manuals