EasyManuals Logo

H3C S3100 Series User Manual

H3C S3100 Series
1057 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #357 background imageLoading...
Page #357 background image
5-13
# Create VLAN 101 through VLAN 104 and assign Ethernet 1/0/1 through Ethernet 1/0/3 to the four
VLANs respectively.
<SwitchA> system-view
[SwitchA] vlan 101
[SwitchA-vlan101] port ethernet 1/0/1
[SwitchA-vlan101] quit
[SwitchA] vlan 102
[SwitchA-vlan102] port ethernet 1/0/2
[SwitchA-vlan102] quit
[SwitchA] vlan 103
[SwitchA-vlan103] port ethernet 1/0/3
[SwitchA-vlan103] quit
# Enable IPv6 multicast routing. Enable IPv6 PIM-DM on VLAN-interface 101 and VLAN-interface 103,
and enable MLD on VLAN-interface 103.
[SwitchA] multicast ipv6 routing-enable
[SwitchA] interface vlan-interface 101
[SwitchA-Vlan-interface101] pim ipv6 dm
[SwitchA-Vlan-interface101] quit
[SwitchA] interface vlan-interface 103
[SwitchA-Vlan-interface103] pim ipv6 dm
[SwitchA-Vlan-interface103] mld enable
[SwitchA-Vlan-interface103] quit
3) Configure Switch B
# Globally enable MLD snooping.
<SwitchB> system-view
[SwitchB] mld-snooping
[SwitchB-mld-snooping] quit
# Create VLAN 103, assign Ethernet 1/0/1 through Ethernet 1/0/3 to this VLAN, and enable MLD
snooping in this VLAN.
[SwitchB] vlan 103
[SwitchB-vlan103] port ethernet 1/0/1 to ethernet 1/0/3
[SwitchB-vlan103] mld-snooping enable
[SwitchB-vlan103] quit
# Create a QoS profile profile1 and configure the QoS profile so that users can join or leave only one
IPv6 multicast group, FF1E::101.
[SwitchB] acl ipv6 number 2001
[SwitchB-acl6-basic-2001] rule permit source ff1e::101 128
[SwitchB-acl6-basic-2001] quit
[SwitchB] qos-profile profile1
[SwitchB-qos-profile-profile1] mld-snooping access-policy 2001
[SwitchB-qos-profile-profile1] quit
# Create a RADIUS scheme scheme1; set the service type for the RADIUS server to extended; specify
the IP addresses of the primary authentication/authorization server and accounting server as 2::1; set
the shared keys to 321123; specify that a username sent to the RADIUS server carry no domain name.
[SwitchB] radius scheme scheme1
[SwitchB-radius-scheme1] server-type extended
[SwitchB-radius-scheme1] primary authentication 2::1
[SwitchB-radius-scheme1] key authentication 321123

Table of Contents

Other manuals for H3C S3100 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the H3C S3100 Series and is the answer not in the manual?

H3C S3100 Series Specifications

General IconGeneral
BrandH3C
ModelS3100 Series
CategorySwitch
LanguageEnglish

Related product manuals