H3C S3100 Series User Manual

2-6
Operation Command Description
Configure not to authenticate users
authentication-mode none
Required
By default, users logging in through the
Console port (AUX user interface) are
not authenticated.
Set the baud rate
speed
speed-value
Optional
The default baud rate of a Console port
is 9,600 bps.
Set the check mode
parity
{
even
|
none
|
odd
}
Optional
By default, the check mode of a
Console port is
none
, that is, no check
is performed.
Set the stop bits
stopbits
{
1
|
1.5
|
2
}
Optional
The stop bits of a Console port is 1.
Configure
the Console
port
Set the data bits
databits
{
7
|
8
}
Optional
The default data bits of a Console port
is 8.
Configure the command level
available to users logging into the
user interface
user privilege level
level
Optional
By default, commands of level 3 are
available to users logging into the AUX
user interface, and commands of level
0 are available to users logging into the
VTY user interface.
Enable terminal services
shell
Optional
By default, terminal services are
available in all user interfaces.
Set the maximum number of lines
the screen can contain
screen-length
screen-length
Optional
By default, the screen can contain up to
24 lines.
You can use the
screen-length
0
command to disable the function to
display information in pages.
Set the history command buffer size
history-command max-size
value
Optional
The default history command buffer
size is 10. That is, a history command
buffer can store up to 10 commands by
default.
Set the timeout time for the user
interface
idle-timeout
minutes
[ seconds ]
Optional
The default timeout time of a user
interface is 10 minutes.
With the timeout time being 10
minutes, the connection to a user
interface is terminated if no operation is
performed in the user interface within
10 minutes.
You can use the
idle-timeout
0
command to disable the timeout
function.

H3C S3100 Series Specifications

General

Brand	H3C
Model	S3100 Series
Category	Switch
Language	English